FTM-300 Firmware Update

Yaesu FTM-300 Firmware

FTM-300 Firmware Update

FTM-300DR/DE Firmware Update Information

Refer to the Firmware Update Instruction Manual in each ZIP file.

The latest versions are listed below with the release dates.

■    MAIN Firmware (USA) Version 1.20 (12/08/20)

■    SUB Firmware (ENG) Version 1.10 (12/08/20)

■    DSP PCTOOLe Version (ENG) 7.11 (7/15/20)

Currently we have two different destination versions of the FTM-300DR/DE: USA and EXP (including EU and CHN). Please open the Update Instruction Manual and review the information before starting the update firmware.

*The firmware version for Japan is different from USA or EXP version. Please check the latest firmware of the Japanese version on the Japan WEB site:

http://www.yaesu.com/ip/amateur index/product/ftm-300d/download.html

You must check the destination version of the radio you have and use the correct update firmware. The destination is marked on the box serial number label. If the box in not available, the country you purchased the radio in may indicate the destination. If the FCC part 15 rules statement is on the radio above the Serial/ID label, it is the USA version. Other versions will not have the FCC label.

Download

FTM-300DR/DE [FTM-300D_USA_Firmware_Update_2020_12.zip] 12/08/20  ( 13.53 MB ) or
      FTM-300DR/DE Update Firmware Information 12/08/20  ( 41.80 KB )

 

MAIN, SUB and DSP

•    DST: USA version covers North and South America, Australia and New Zealand*

Folder Name: [FTM-300D_USA_Firmware_Update_2020_12.zip]

FTM-300D_MAIN_ver120(U SA)

FTM-300D_SUB_ver110(ENG)

FTM-300D_DSP_ver0711(ENG) *Covers all countries

•    DST: EXP/EU/CHN covers all other countries except USA, Australia, and New Zealand Folder Name: [FTM-300D_EXP_Firmware_Update_2020_12.zip]

FTM-300D_MAIN_ver120(EXP)

FTM-300D_SUB_ver110(ENG)

FTM-300D_DSP_ver0711(ENG) *Covers all countries

CAUTION:

Please be sure to confirm the model and the version of your transceiver before starting the update. Writing incorrect firmware to the transceiver may cause abnormal operation or failure.

Please read the FTM-300DR/DE Main and DSP Firmware Update Instruction Manuals before proceeding!

Implements improvements

FTM-300DR/DE Main Ver. 1.20 (12/08/20)

FTM-300DR/DE SUB Firmware Ver. 1.10 (12/08/20)

FTM-300DR/DE DSP PCTOOLe Ver. 7.11 (7/15/20)

•    An “AUDIO” selection has been added to the Bluetooth® setting menu to designate the audio output destination when a Bluetooth® is connected:

[Bluetooth® setting menu] “AUDIO”

When “AUTO” is selected: Audio is output from the Bluetooth® headset.

When “FIX” is selected: Audio is output from both the Bluetooth® headset and the transceiver speaker.

•    Other functions have been improved and optimized.

If you already have the above listed firmware versions, it is not necessary to update the FTM-300DR/DE again.

We hope this new firmware will increase your enjoyment of the FTM-300DR/DE. Thank you for choosing Yaesu radios. If you have any problems or questions, please contact Yaesu Amateur Tech Support

Yaesu USA | 6125 Phyllis Drive | Cypress, CA 90630 | 714.827-7600 | FAX: 714.827-8100

http://www.yaesu.com

error: Content is protected !!